Sticker, sticker, for mailbox facade
Motif: puppy, dog, doberman
NB: For technical reasons (photographic and computer), the actual rendering of the products may sometimes differ slightly from that of the photographs presented on the Site.
For perfect adhesion, the substrate must be dry and clean.
The substrate temperature must be between 10 ° C and 30 ° C
Wash and dry your surface before application. We advise you to clean the surface with household alcohol (Do not use greasy solvent such as rubbing alcohol)
Remove the lock and the plastic plate (location of the name) you can then cut these locations on the sticker with a scissors or a cutter.
Peel off the pattern from the backing
Position the sticker, once the final location of your sticker has been chosen, stick it by chasing the air from the middle outwards (use a soft cloth).
Little tip: if you have small air bubbles that appear despite everything, pierce them gently with a fine needle.
The sticker has a permanent adhesive, if necessary it is however possible to remove it.
Method: Heat the surface with a hair dryer, it will soften the glue and the sticker will peel off easily. Then remove any residue with household alcohol.