Your EXCLUSIVE sticker for letterbox front
Use the configurator to position the image of your choice according to your desire
Dimensions: 28x28 cm, rounded corners
-
- Item made to order, lead time, packaging and shipping: 8 working days Max.
- This sticker is covered with a transparent protective film specific for the outdoor environment, resists bad weather, UV rays and washes.
- Appearance: shiny
- This sticker is designed to fit all standard and standardized mailboxes.
- Applied according to our recommendations, we guarantee this sticker for 5 years.
- All of our stickers are designed and manufactured in Nice, France.
Installation advice
For perfect adhesion, the substrate must be dry and clean.
The substrate temperature must be between 10 ° C and 30 ° C
Wash and dry your surface before application.
We advise you to clean the surface with household alcohol (Do not use greasy solvent such as rubbing alcohol)
Remove the lock and the plastic plate (location of the name) you can then cut these locations on the sticker with a scissors or a cutter.
Peel off the pattern from the backing
Position the sticker, once the final location of your chosen sticker, stick it by expelling the air from the middle to the outside (use a soft cloth).
Small tip: if you have small air bubbles appearing, despite everything, pierce them delicately with a fine needle.Withdrawal
The sticker has a permanent adhesive, if necessary it is however possible to remove it.
Method: Heat the surface with a hair dryer, it will soften the glue and the sticker will peel off easily. Then remove any residue with household alcohol.NB:
- For technical reasons (photographic and IT), the actual rendering of the products may sometimes differ slightly from that of the photographs presented on the Site.
- The use of stickers is the sole responsibility of the buyerPS: Sexual, xenophobic or violent images are not accepted
- Item made to order, lead time, packaging and shipping: 8 working days Max.